| Customization: | Available |
|---|---|
| After-sales Service: | Third Party Support |
| Warranty: | 12 Months |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Segmented mower
There is no problem installing the SM-110 front mounted lawn mower on tractor with belt drive.
In order to use the segmented lawn mower correctly, a floating hydraulic distributor must be used.
Where can you use a lawn mower
A mower is used to remove weeds or weeds during hay harvesting. Mowers are divided into rotor mowers and segmented mowers, driven by different types and configurations of power selection shafts. The segmented mower is installed on a small tractor at the front (front). The working width of these fragments is 110 centimeters. Mowers can easily handle drying and seedlings if their diameter does not exceed 1 centimeter. When the mower is working, the operating speed of the tractor is about 2-8 kilometers per hour, and the productivity is 1.7-5.4 hectares.
In agriculture, besides cultivation, mowing and harvesting hay also play an important role. This is a labor-intensive and time-consuming process, but if there is a motor unit with belt drive, the task of mowing will be greatly simplified.
The belt drive device of the mower is hidden under a protective cover to ensure the safety of the operator. The quick and detachable connector allows for easy installation of the lawn mower, with a reliable design ensuring trouble-free operation. The segmented cutting mechanism can easily handle high weeds and seedlings with a diameter of no more than 1 centimeter. If necessary, the segments can be easily replaced. The height of the lawn mower is adjusted by the slide rails installed on the edge of the lawn mower. The two channels of the knife evenly cut the grass. Landscape designers use it to maintain the perfect state of the lawn. These fragments can capture 110 centimeters at once.
Production: China
Working width: 110
Cutting height, mm: from 40
Tractor traction level: 0.2-0.6
Speed VA, speed: 540
Working speed, km/h: 2.5-3.6
Working dimensions, mm: 900 x 1130 x 670
Weight, kg: 40
Tractor rear mounted disc mower
Tractor mounted disc mower TRM-100
The rotary suspended lawn mower TRM-100 is designed specifically for small tractor scouts and comes with a single point assembly system. The power selection of the lawn mower is selected from the additional pulleys on the tractor gearbox. Lift to the transportation position through the tractor hydraulic system without the need to connect additional hydraulic hoses.
The design of a lawn mower has two aspects: work and transportation. In the transportation position, the mower itself rises by 90 degrees. This allows for the transportation of tractors and mowers to the mower site without any issues.
The manufacturer envisions using two lawn mowers simultaneously on the tractor: the TRM-100 (rear wheel grinder) and the FRM-80 (front wheel grinder). In this case, the cutting width doubled to 160 centimeters.
The product warranty period is 12 months.
Production: China
Working width: 100cm
Number of working drums: 2
Speed, speed: 400
Number of knives in the plate: 4
Cutting height, starting from mm: 20
Tractor traction level: 0.2-0.6
Working speed, km/h: up to 6
Weight, kg: 54
Rotor Mower
RM-1
The rotor mower is designed for mowing dense vegetation with a diameter of up to 10 mm.
The RM-1 mower is a classic model with a simple device and setup process. The discs are driven by a belt take-off shaft of the walk-behind tractor (pulley on the engine flywheel). With the help of a tension on a working walk-behind tractor, you can turn on and off the mower drive. . A rotary mower, unlike a segmental mower, is used to harvest hay for feed.
Working width, mm 800
Number of working drums 2
Speed, speed 1800-2400
Number of Knives in Part 4
Cutting height, mm up to 70
Tractor required power 8
Working speed, km/h 2-4
Working size, mm 810x930x780
Weight, kg 27
Made in China
RM-1L
Suspended rotary lawn mower, used for large-scale mowing and grain crops. This work uses two discs with special blades that are not afraid of falling into stones on the grass.
Main features:
Cutting width -0.8 meters;
Mower working speed, km/h 2,0-4,0
Cutting height - up to 0.7 meters;
Yield: 0.15 hectares/hour;
The speed is between 1800 and 2400 rpm.
Overall dimensions (LxWxH), CM 81x35x80
Weight -22 kilograms
Packaging product parameters
Product unit: piece
Weight, kg: 30.40
Length, mm: 790
Width, mm: 250
Height, mm: 830
RM-2
The RM-2 rotor mower is a suspended lawn mower designed to cut rough vegetation of any hardness such as grass, grains, hard stems, and even plants with hard roots on slopes below 10 °. The lawn mower is connected to an air-cooled motor set (6.5 to 18 horsepower) and to the central shaft of the motor set. Its characteristic is a knife that can be used to cut weeds. The mowing height is adjustable.
The lawn mower was developed for the gear and shaft transmission type cultivator.
Overall dimensions 880x620x620 mm
Weight 30 kilograms
Working speed 3-4 km/h
Cutting height 40-80 mm
Speed V3600
Mowing height can reach 1 meter
QC Flow:
1. Material inspection before production to avoid any potential problem from the very beginning.
2. Inspection for half-finished products during order production to find the problem earlier if any;
3. Inspection for finished products after production to make sure the products comply with customer's requirement.
Department Introduction of QC / Technical Support:
In order to get super quality, we have special QC department to control the product quality. This department is composed by experienced engineers who can offer us strong technical support easily. The engineers will inspect product quality both in order production and after order production to make sure each shipment we send to our customers is in the best status. With their strict quality control, our consistent quality wins us more and more orders from our international customers.
Full Service and Product Warranty:
We offer our customers technical assistance and a full one year warranty on all products covering all manufacturing defects. ME Our manufacturing facility is completely computerized to provide our customers efficiency, reliability, high quality and timely shipments. Spare Parts:We can supply spare parts within 15 business days or sooner. Currently, part numbers are not available on-line. You may however determine the part number from your Parts Book or, if it is a simple part, you may describe the part and send us an order online. If you are not sure, please Contact Us . Shipment: We can ship from our port in Qingdao or Shanghai, China to anywhere in the world within short days.
){kind=link}