| Customization: | Available |
|---|---|
| After-sales Service: | Third Party Support |
| Type: | Digging Harvester |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
4U-1.3B potato harvester is designed for the 60-100hp walking tractor, it also could be used for the harvesting of the sweet potato, taro, garlic, peanut and so on. It features of the reasonable design, multi-function, easy maintenance, high reliability and easy operation.
The machine works together with 18-150 horsepower tractors, and is mainly used for the harvesting and stacking of underground potatoes such as potatoes, sweet potatoes and peanuts. The net recovery rate is greater than 99%, and the peeling rate is less than 1%.
The multifunctional potato harvester is a special harvesting machine for harvesting potato, sweet potato and other root crops. It can also harvest stem and tuber crops such as peanuts, carrots, onions, garlic and other agricultural products. It can complete digging, cleaning, separation, and laying at one time. and many other tasks. The machine has advanced principle, good adaptability and high reliability.
How the harvester works
The harvester is connected with the drive shaft of the small four-wheel tractor. Under the traction of the tractor, the potatoes (garlic, sweet potato, etc.) excavated by the excavating shovel are laid on the separation chain, and the soil falls on the separation chain when the separation chain rotates. Below the chain, potatoes (garlic, sweet potato, etc.) and unfallen clods fall on the vibrating screen above the separation chain, and after cleaning and separation, they are concentrated on the ground behind the machine.
The 4U-B potato harvester is a new type of root and stem harvesting equipment. This equipment can better adapt to the requirements of rhizome planting and growth characteristics, and can realize the functions of excavation, soil cleaning, laying, etc., the entire operation process is smooth, and the operation efficiency is high. This machine is used for roots and stems to receive goods, which can greatly reduce manpower requirements. , To alleviate the shortage of manpower in rural areas.
1) High harvest rate and low damage rate;
2) Adopting the design of the excavation device's entry angle and the conveying separation device's lifting angle to be consistent, effectively solving the problem of soil accumulation after shoveling;
3) Adopt the accompanying depth-limiting mechanism to effectively reduce the resistance and improve the smoothness of operation;
4) It runs briskly without vibration, does not block the grass, leaks quickly, has a simple structure and has a long service life.
5) The rhizome harvester can directly extract the residual agricultural film in the soil without affecting the growth of crops in the next season.
6) The 29.4-58.8KW tractor can be driven, which is compatible with the four-wheel tractors owned by most farmers at this stage, and has the characteristics of wide adaptation power and fast yield.
Scope of application: suitable for potato, sweet potato and other potato crops with moisture content not greater than 20%, ridge width 800-1100mm, ridge height 100-260mm. Exceeding the scope of adaptation will result in reduced operating performance or failure to use, and shorten the service life of the machine.
| Model | Power (HP) |
Weight (kg) |
Working depth(mm) | Working width(mm) | Dimension(L*W*Hmm) | Matching type |
| 4U-0.9B | 40-80 | 420 | 400-450 | 900 | 2000*1150*1150 | Traction rear suspension |
| 4U-1.1B | 50-90 | 450 | 400-450 | 1100 | 2100*1400*1050 | Traction rear suspension |
| 4U-1.3B | 60-100 | 500 | 400-450 | 1300 | 2200*1500*1100 | Traction rear suspension |
| 4U-1.6B | 70-110 | 650 | 400-450 | 1600 | 2350*1900*1170 | Traction rear suspension |
QC Flow:
1. Material inspection before production to avoid any potential problem from the very beginning.
2. Inspection for half-finished products during order production to find the problem earlier if any;
3. Inspection for finished products after production to make sure the products comply with customer's requirement.
Department Introduction of QC / Technical Support:
In order to get super quality, we have special QC department to control the product quality. This department is composed by experienced engineers who can offer us strong technical support easily. The engineers will inspect product quality both in order production and after order production to make sure each shipment we send to our customers is in the best status. With their strict quality control, our consistent quality wins us more and more orders from our international customers.
Full Service and Product Warranty:
We offer our customers technical assistance and a full one year warranty on all products covering all manufacturing defects. ME Our manufacturing facility is completely computerized to provide our customers efficiency, reliability, high quality and timely shipments. Spare Parts:We can supply spare parts within 15 business days or sooner. Currently, part numbers are not available on-line. You may however determine the part number from your Parts Book or, if it is a simple part, you may describe the part and send us an order online. If you are not sure, please Contact Us . Shipment: We can ship from our port in Qingdao or Shanghai, China to anywhere in the world within short days.
Q1: Are you a factory or trading company?
We have our factory for the farm machines and we also have our own trading company with self-supported import and export right.
Q2: How can I trust on your company?
We are a fully registered manufacture and exporting company by China Export Registration Authorities. Moreover, our products have been exporting to a number of countries including Switzerland, Russia, Spain, Netherlands, Australia, Peru, Thailand, Pakistan, Indonesia, Tanzania, Nigeria, South Africa, Sudan, Congo etc.
Q3: Where is your factory located? How can I visit there?
Our factory is located in Linyi City, Shandong Province, China. About 1 hour away from Linyi Airport, 4 hours away from Qingdao airport. All our clients are warmly welcomed to visit us!
Q4: How can I place an order from your website?
It is very easy.Once you find the implement you need on our website and place an inquiry against it, or, get to the inquiry section and leave us a message there with name, country and phone number, we will get in touch with you at the earliest.
Q5: How can I make the payment?
Payment is made via Telegraphic Transfer (T/T) through the bank against the proforma invoice.
30% as prepayment and the balance when the goods are ready for shipping.
Q6: What's the Payment terms?
T/T, L/C or some other ways payment method.
Q7: At which port do you usually ship the good?
We usually ship goods via Qingdao port of China.
Q8. How about the Warranty ?
12 months warranty from the time of the goods arrive at destination.
){kind=link}