MS120 Mini Tractor
Suitable for dry fields in plain, mountain and hilly areas. Attached with the implements, it could finish the work of tilling, plowing, mowing, reaping, harvesting, irrigating and so on. When attached the trailer, it also could be used for the short distance transportation.
Can be used as a stationary power source for drainage and irrigation.
With quick coupling,easy to chang farming implements.
Different product colors is optional, to adapt to different marketThe first review of the tractor.
At the first inspection of the MS120 tractor, we got the first impressions of this model, which includes the latest developments for this class of equipment - minitractors weighing up to 700 kg.
The tractor became stronger, the vibration decreased, due to the fact that the load-bearing frame became more powerful. The long-awaited adjustment of the track has been added to the tractor - now the distance between the wheels can be adjusted from 105 to 140 cm. The Scout Minitractor can be used both in gardens with frequent growths of trees (the T-12 has the smallest turning width among its class models) and when working with Potatoes - planting, inter-row processing and excavating is ideally done when the wheels are placed at a maximum width of 140 cm.
From the minuses of this design, we can see the fact that the rear wings are not adjustable in width, and with the narrowing of the rear wheels, the hub itself still does not become smaller.Mini tractor MS120 was equipped with a hydraulic pump with a two-channel hydraulic distributor. What does it mean?
Previously, to install on the tractor front attachments (for example, a mower, or a snow dump), it was necessary to change the hydraulic hoses from the rear to the front. This created a certain discomfort - it was necessary to follow that hydraulic oil after this procedure remained at the desired level, and the time was lost. Now - once you put the hoses on the front hinged, you get rid of this procedure almost forever. Simply disconnect the hinged itself, leaving the front hydraulic hoses with the cylinder in place, and if necessary, simply attach it to the adjustable fastener (it was previously fixed in the frame itself, and now it is adjustable in two axes). Adjusting the position of the front mounted is now as effective as possible, say goodbye to the skewing of the belts because of the inconsistency of the pulleys! The motor is now equipped with a five-drive pulley. Now, to install the mower, you do not need to remove the hood.
To use the front and rear attachments at the same time is now elementary.
On the tractor completely revised the warning system sensors (dashboard). If earlier the coolant temperature and oil pressure sensors in the diesel engine displayed warning signals (worked yes / no), now the temperature is correctly displayed on a scale of degrees Celsius, and the pressure is correctly displayed in kg / cm.cub. (Approximately 1 bar). What really did not suffice is the engine hour meter, for the correct measurement of the operating time, and the onset of the planned maintenance; By the way, a small mistake has been fixed - the oil drain plug in the pallet has been transferred. Now it is much more convenient to drain the oil.
The ammeter was moved down, and made it electronic, not mechanical.
As always, Mingsin mini tractor are democratic prices and excellent quality of every detail. The already well proven system of switching on and off the lock of the tractor differential (rear axle) with forced switching is now used on many models of "Scout" mini tractors. Tractors, prices for which today can fluctuate significantly from the current dollar exchange rate will never let you down on the site, and will greatly facilitate your country life.
The trademark "Mingsin" is an American technique that is produced in China, and the full cycle of assembly and pre-sale preparation takes place in Russia, at our service and assembly shops in Tula, Belgorod, Krasnodar, as well as in the Leningrad region . In Russia, this equipment is supplied under the trademark "Scout", for simplified use. Firm colors of equipment are blue and white. Since 2015, cases of falsification of the Scout technique have increased, which can also be painted in firm colors. In order to avoid deception, please trace that on the wings of the tractor and on the gearbox there were prints of the logo "Mingsin" with a star. Do not buy fakes of poor quality!
When buying tractors "Mingsin", you will receive a complete set of documents for its registration. To put the tractor on the register, or not to put? You decide. On the one hand, the case is troublesome, registration in RosTehNadzor obliges you to pay a transportation tax, have the rights of a tractor operator (without them you will not get state numbers), and many Scout owners are rarely chosen for public roads. On the other hand, having once taken care of the legality of owning a vehicle, you will no longer have problems with traffic police, no one will ask you questions when driving on a country road - everything is legal. The tractor is equipped with light and sound signals - headlights of far and passing light, turns, horns.
Excellent technical refinement, no less important when working with a milling cutter and a two-hull plow. The model MS120 Mini Tractor has a hydraulic distributor with a floating mode function. Accordingly, a double-hull plow and active rototiller (this hinged comes in the kit) are fitted with wheels for adjusting the burying. Why is this function necessary? In its absence, the operator of the tractor needed to monitor the conditions of the terrain during plowing or cultivation. It was necessary to constantly monitor - did not the milling cutter too deep? Did the plow "drown"? With any change in the terrain, it was necessary to control the position of the hinged. As a result, the work boiled down to the fact that the operator looked all the time, not forward, but back, controlling the degree of penetration of the hinged. The same was true for working with soot, seeders and potato diggers. Now you can forget about this problem! Set the required depth on the adjusting wheels, turn on the "floating mode" - voila! Floating mode is installed in all mini tractors MS120 produced with the latest time. To switch it on you need to maximally extend the hydraulic cylinder (switch and hold the lever in the lower position). Thus, the oil from the distributor will return through the oil return tube to the tank. Then squeeze the clutch pedal and lower the hydraulic cylinder to the lowest position. After this, the hydraulic cylinder will go into a free position and the attachments will function under their own weight.